Jetski, Tender & Seabob Chocks

Chocks are used to support jetskis or tenders on yacht decks, swim platforms, flybridges and hydraulic bathing platforms. Cradles are shaped around a specific product, such as a Seabob, to provide a more contoured and protective storage position. All chocks and cradles are made from Iroko, and the removable systems use Acetal pins for push-fit installation.

For most sit-down jetskis, choose universal jetski chocks. They are designed to fit approximately 99% of sit-down jetskis and use a self-adjusting, load-spreading design that adapts to different jetski hull shapes. For Seadoo Spark and Trixx models, you could opt for the dedicated Seadoo Spark / Trixx jetski chocks.

Yes. Both universal jetski chocks and Seadoo Spark / Trixx jetski chocks are push-fit removable systems using Acetal pins. The chocks can be pushed into the deck fittings when the jetski is onboard, then pulled out when the jetski is launched to help keep the deck or swim platform clear.

The universal jetski chocks kit includes:

• 2 x universal Iroko wood chocks, forward and aft
• Acetal pins for push-fit removable installation
• 4 x flush-fit deck fittings, ideal for teak decks
• 4 x low-profile deck fittings, ideal for GRP decks or limited cavity spaces
• 4 x stainless steel deck plates
• 12 x stainless steel fixing screws
• Installation template
• Complete fixing and drilling kit, including 32mm hole saw, arbor and 3mm drill bit

Choose Seadoo Spark / Trixx jetski chocks for Seadoo Spark and Seadoo Trixx models. These are removable Iroko jetski chocks supplied as forward and aft chocks, using Acetal pins and deck fittings for yacht decks, swim platforms and superyacht storage areas. If you do not already have a way of securing your jetski to the deck, they can be paired with a jetski tie-down kit.

The Seadoo Spark / Trixx jetski chocks kit includes:

• 2 x Iroko chocks, forward and aft
• Acetal pins for push-fit removable installation
• 4 x flush-fit deck fittings for teak decks
• 4 x low-profile deck fittings for GRP and faux teak decks
• 4 x stainless steel deck plates
• Fixing screws

For general tender storage, choose universal tender chocks. They are removable, self-adjusting and load-spreading, and are suitable for tenders and jetskis up to 1500kg. For Williams tenders, choose Williams tender chocks.

Yes. universal tender chocks are a push-fit removable system using Acetal pins. This allows the chocks to be fitted when the tender is onboard and removed when the tender is launched, helping to keep the deck area clear.

The universal tender chocks kit includes:

• 2 x universal Iroko chocks, forward and aft
• Acetal pins for push-fit removable installation
• 4 x flush-fit deck fittings for teak decks
• 4 x low-profile deck fittings for GRP and faux teak decks
• 4 x stainless steel deck plates
• Fixing screws
• Chock installation template
• Drill kit: 32mm hole saw, Arbor C 32–152mm and 3mm drill bit

Williams tender chocks are for Williams MiniJet, SportJet, DieselJet and TurboJet models. They are made from Iroko and use Acetal pins for push-fit removable installation.

Williams tender chocks use Acetal pins that push into low-profile or flush-fit deck fittings. The chocks can be pushed into position when the Williams tender is onboard, then pulled out and removed when the tender has been launched or the deck needs to be cleared.

Choose the Seabob cradle that matches your Seabob model and deck setup. Cradle options are available for Seabob F5, F5S, F5SR, F9 and F9S models. Choose a freestanding cradle for flexible placement or a push-fit removable cradle when you want a secure deck-mounted system that can be removed when the Seabob is not onboard.

All chocks and cradles are made from Iroko. Seabob cradles also include soft protective contact pads to help protect the Seabob’s finish during storage and reduce the risk of marking or scuffing.

A freestanding Seabob cradle is used where you need flexible storage without deck fittings. A push-fit Seabob cradle uses Acetal pins and deck fittings so the cradle can be pushed into position when needed and pulled out when the deck needs to be cleared.

For teak decks, flush-fit deck fittings are normally recommended for the cleanest finish. For GRP decks, faux teak decks or areas with limited cavity space, low-profile deck fittings are usually the better option.

Yes. universal jetski chocks, universal tender chocks, Williams tender chocks and Seadoo Spark / Trixx chocks can all be used on hydraulic bathing platforms if required, as well as swim platforms, flybridges and fixed deck areas.

Yes. Chocks and cradles support the toy, but a suitable tie-down kit helps secure it in place during storage or transit. For jetskis, use a jetski tie-down kit. For tenders, use a tender tie-down kit. For Seabobs, use a Seabob tie-down kit.

Start with the craft you need to store. Choose universal jetski chocks for most sit-down jetskis, Seadoo Spark / Trixx jetski chocks for Spark and Trixx models, universal tender chocks for tenders and jetskis up to 1500kg, Williams tender chocks for MiniJet, SportJet, DieselJet and TurboJet models, or Seabob cradles for F5, F5S, F5SR, F9 and F9S models.