Useful related products for storing, moving and securing your Seadoo Spark or Spark Trixx onboard.
Removable Iroko chocks for storing Seadoo Spark and Spark Trixx models on yacht decks, swim platforms and garage decks.
Low-height jetski trolley designed for superyacht tender garages and storage areas where clearance is limited.
Adjustable trolley for moving and positioning jetskis onboard, suitable for superyacht garages and deck storage layouts.
Quick guide: Use the lifting sling for launch and recovery, chocks for onboard storage, and a jetski trolley for moving or positioning the PWC around the yacht deck or tender garage.
Helpful answers about Seadoo Spark Trixx jetski lifting sling kits, model year compatibility, yacht crane lifting, davit launch and recovery.
The correct Seadoo Spark Trixx lifting sling depends on the year of build. For Seadoo Spark Trixx models built from 2016–2023, use the Seadoo Spark Trixx Jetski Lifting Sling 2016–2023. For Seadoo Spark Trixx models built from 2024 onwards, use the Seadoo Spark Trixx Jetski Lifting Sling 2024+.
No. There is one Seadoo Spark Trixx lifting sling for both Spark Trixx 2up and Spark Trixx 3up models. The important difference is the year of build, not whether the Spark Trixx is a 2up or 3up model.
For Seadoo Spark Trixx models built between 2016 and 2023, use the Seadoo Spark Trixx Jetski Lifting Sling 2016–2023.
For Seadoo Spark Trixx models built from 2024 onwards, use the Seadoo Spark Trixx Jetski Lifting Sling 2024+.
Locate the HIN (Hull Identification Number) on your Seadoo. The last 2 numbers are the year of build.
The Hull Identification Number (HIN) is typically located on the starboard (right) side of the hull, near the rear, either engraved directly onto the Polytec hull, or on a small, riveted plate.
For pontoon boats, the HIN is found on the starboard side of the transom (the stern).
An example of a HIN number is: CA-YDV76671B921. This shows that the year of build is 2021.
Seadoo periodically redesign their PWC models to improve things like handling, stability, maximise fuel efficiency etc. The Spark Trixx was redesigned in 2024, therefore there are 2 lifting kit options depending on the year of build of your Spark Trixx. Always choose the sling that matches the year of build of your Seadoo Spark Trixx before ordering.
Yes. Seadoo Spark Trixx jetski lifting sling kits are designed for yacht and superyacht launch and recovery operations using suitable crane, davit or tender garage lifting arrangements. Always ensure the lifting equipment, lifting point and procedure are suitable for the jetski and onboard setup.
Yes. Seadoo lifting sling kits are matched to specific model ranges and, for Seadoo Spark Trixx models, the year of build also matters. Always check your exact Seadoo model and build year before ordering.
A jetski lifting sling is used for launch and recovery of a PWC from a yacht, superyacht, tender garage, davit or crane system. It provides a practical lifting arrangement when matched correctly to the jetski model and used with suitable lifting equipment.
Yes, when correctly matched to the Seadoo Spark Trixx model year and used with suitable lifting equipment, the sling can support practical launch and recovery during yacht and superyacht operations. Always inspect lifting equipment before use and follow safe lifting procedures.
If you are unsure which year your Seadoo Spark Trixx was built, check the HIN (Hull Identification Number) first. You can also use the jetski lifting sling buyers guide or contact us via email or WhatsApp for help choosing the correct kit.
Seadoo lifting sling kits are available for a range of Seadoo models. You can view the full Seadoo jetski lifting slings range if you need a sling for a different Seadoo model.
Quick guide: There is one sling for both Seadoo Spark Trixx 2up and Spark Trixx 3up models. Choose the correct sling by year of build: 2016–2023 or 2024 onwards.
