Williams TurboJet Tender Chocks

Chocks for Williams 285TJ, 325TJ, 385TJ and 445TJ Tender models

Williams TurboJet tender chocks provide a removable Iroko storage solution for securing Williams TurboJet tenders on yacht decks, swim platforms, flybridges and superyacht tender storage areas. Suitable for Williams TurboJet 285TJ, 325TJ, 385TJ and 445TJ models, the chocks are designed to support the tender securely when used as part of a suitable onboard storage setup.

The kit is supplied with forward and aft Iroko chocks, plus deck fitting options for teak, GRP and faux teak decks. Flush-fit deck fittings are included for real teak installations, while low-profile deck fittings are supplied for GRP and faux teak deck surfaces.

WILLIAMS TENDER CHOCKS ©www.superyachtmarinestore.com

Key Features

Williams TurboJet Tender Chocks Features

Removable Iroko chocks designed specifically for Williams TurboJet models, supplied with deck fittings for yacht decks, swim platforms and superyacht storage areas.

✓

Designed for Williams TurboJet

Purpose-made chocks for Williams TurboJet models, helping provide a secure and tidy storage solution onboard.

🪵

Iroko Wood Chocks

Supplied as 2 x Iroko chocks, forward and aft, giving a smart marine-grade finish suited to yacht decks and swim platforms.

↕

Push-Fit Removable Design

The chocks use a push-to-fit, pull-to-remove system, allowing the deck area to be cleared when the Tender is not onboard.

🔩

Deck Fittings Included

Includes 4 x flush-fit deck fittings for teak decks and 4 x low-profile deck fittings for GRP and faux teak decks.

🛥

Teak, GRP & Faux Teak Compatible

Supplied with fitting options for different deck finishes, making the kit suitable for yacht decks, swim platforms and flybridges.

🧰

Complete Fitting Kit

Kit includes stainless steel deck plates and fixing screws, giving you the main components required for installation.

🇬🇧

Manufactured in the UK

Manufactured in the United Kingdom for yacht and superyacht use, with a premium finish suitable for professional marine environments.

🔐

Tie-Down Kit Compatible

If you do not already have a way of securing your tender to the deck, this chock kit can be paired with a tender tie-down kit.

⏱

Fast Dispatch

Available to order and normally ships within approximately 3–5 working days from invoice payment.

Williams TurboJet Tender Chocks

Specifications:

Manufactured in Iroko (similar to hard wood like teak but without the cost)

Tools required for chock deck fittings installation:

Flush Fit deck fittings: 3mm drill bit, 68mm hole saw, 32mm hole saw, router, mastic
Low Profile deck fittings: 3mm drill bit, 32mm hole saw, sealant

Check out drill kit C465

One more thing.. if you do not already have a means of securing your tender to the deck please click HERE to see the options.

RMC807

£849.17

excl. VAT and shipping costs

Available
Ships within 2 - 5 working days from invoice payment, Submit Quote/Invoice Request to get accurate shipping costs¹

What’s included in the Williams TurboJet Tender Chock Kit

Williams TurboJet Tender Chock kit components included for installation

FWD & AFT Chock

4 x Flush Fit Deck Fittings

4 x Low Profile Deck Fittings

4 x Stainless Steel Deck Plates

4 x Split Bush

12 x Fixing Screws

Chock Deck Fitting Installation Tools (optional)

Tools to aid an easier install

Deck Fitting Drill Kit

View Product

Chock Router Jig Set

View Product

Chock Installation Template

View Product

Router Cutter

For flush deck fitting installation

View Product

Complete Williams Tender Chocks Setup with a Tender Tie Down Kit

Tender Tie Down Kits

Chocks support the tender, while tie down kits secure it to the deck. Pair your Williams tender chocks with a suitable marine-grade tender tie down kit for a complete onboard storage setup.

View Tender Tie Down Kits

Deck Fitting Options Explained

Williams tender chocks are supplied with both flush-fit and low-profile deck fitting options, making the kit suitable for different yacht deck surfaces and installation preferences.

Flush-Fit Deck Fittings

Best for real teak decks

Best for: Real teak decks where a recessed deck fitting is preferred.

Flush-fit deck fittings sit neatly into the deck surface, helping create a cleaner finish when the chocks are removed. They are ideal for yacht decks where a more discreet removable chock installation is required.

Designed for real teak deck installations
Creates a neat recessed finish
Allows the Iroko chocks to be removed when not in use
Suitable where a lower-profile deck finish is preferred

Low-Profile Deck Fittings

Best for GRP and faux teak decks

Best for: GRP and faux teak decks where a raised low-profile fitting is suitable.

Low-profile deck fittings are used where a recessed flush-fit installation is not the preferred option. They provide a practical removable mounting point for the chocks on suitable GRP or faux teak deck surfaces.

Suitable for GRP and faux teak deck installations
Practical raised low-profile fitting design
Allows the Iroko chocks to be removed when required
Useful where flush routing into real teak is not required

Quick guide: Use flush-fit deck fittings for real teak decks, or low-profile deck fittings for GRP and faux teak decks. Both options work with the push-fit removable chock system.

Chock Spares & Extras

Flush Deck Chock Deck Fitting Set

View Product

Low Profile Chock Deck Fitting Set

View Product

Caulk Line Deck Fitting Set

View Product

Williams TurboJet Tender Chocks FAQs

Helpful answers about Williams TurboJet tender chocks, model compatibility, removable Iroko chock systems, deck fitting options and tender tie down kits.

Are these chocks suitable for Williams TurboJet tenders?

Yes. These chocks are designed for Williams TurboJet tender storage on yacht decks, swim platforms, flybridges and superyacht tender storage areas.

Which Williams TurboJet models do these chocks fit?

These chocks are suitable for Williams TurboJet 285TJ, 325TJ, 385TJ and 445TJ tender models.

What are the chocks made from?

The chocks are made from Iroko, a durable hardwood commonly used for yacht and marine deck equipment.

Are the Williams TurboJet chocks removable?

Yes. The chocks use a push-fit removable deck fitting system, allowing the Iroko chocks to be removed when the tender is not onboard.

What is included in the Williams TurboJet chock kit?

The kit includes:

FWD and AFT Iroko chocks
4 x flush-fit deck fittings
4 x low-profile deck fittings
4 x stainless steel deck plates
4 x split bushes
12 x fixing screws

What deck fittings are supplied?

The kit is supplied with both flush-fit deck fittings and low-profile deck fittings, giving installation options for different yacht deck surfaces.

Can the chocks be used on teak decks?

Yes. The flush-fit deck fittings are best suited to real teak decks where a recessed deck fitting installation is preferred.

Can the chocks be used on GRP or faux teak decks?

Yes. The low-profile deck fittings are best suited to GRP and faux teak decks where a raised low-profile fitting is suitable.

Do I need a tender tie down kit as well?

Chocks support the tender hull, while tie down kits secure the tender to the deck. If you do not already have suitable securing points and straps, pair the chocks with a tender tie down kit.

Can I buy spare deck fittings?

Yes. Spare and additional deck fitting kits are useful if you want to use the same removable chocks in more than one storage position, or if you need replacement deck fittings for an existing installation.

Can these chocks be used on hydraulic bathing platforms?

Yes. Williams tender chocks can be used on hydraulic bathing platforms if required, provided the installation and platform structure are suitable.

What tools are required for installation?

Tool requirements depend on the deck fitting type. Flush-fit deck fitting installation usually requires drilling, hole saws, routing and mastic. Low-profile deck fitting installation usually requires drilling, a suitable hole saw and sealant.

Are installation tools available?

Yes. Optional chock installation tools and drill kits are available separately to help with deck fitting installation.

How quickly do the Williams TurboJet chocks ship?

Dispatch times can vary depending on stock and order details. Please check the product page or contact us before ordering if you need the chocks by a specific date.

What related products should I consider?

Quick guide: These chocks suit Williams TurboJet 285TJ, 325TJ, 385TJ and 445TJ models. Use flush-fit deck fittings for real teak decks, low-profile fittings for GRP or faux teak decks, and pair with a tender tie down kit for a complete securing setup.