Williams MiniJet Tender Chocks

Williams MiniJet tender chocks provide a removable Iroko storage solution for securing Williams MiniJet tenders on yacht decks, swim platforms, flybridges and superyacht storage areas. Supplied as forward and aft chocks, the system uses push-fit removable deck fittings so the deck area can be cleared when the tender is not onboard.

The kit includes fitting options for teak, GRP and faux teak decks, with flush-fit deck fittings, low-profile deck fittings, stainless steel deck plates, split bushes and fixing screws included.

Key Features

Williams MiniJet Tender Chocks Features

Removable Iroko chocks designed specifically for Williams MiniJet models, supplied with deck fittings for yacht decks, swim platforms and superyacht storage areas.

✓

Designed for Williams MiniJet

Purpose-made chocks for Williams MiniJet models, helping provide a secure and tidy storage solution onboard.

🪵

Iroko Wood Chocks

Supplied as 2 x Iroko chocks, forward and aft, giving a smart marine-grade finish suited to yacht decks and swim platforms.

↕

Push-Fit Removable Design

The chocks use a push-to-fit, pull-to-remove system, allowing the deck area to be cleared when the Tender is not onboard.

🔩

Deck Fittings Included

Includes 4 x flush-fit deck fittings for teak decks and 4 x low-profile deck fittings for GRP and faux teak decks.

🛥

Teak, GRP & Faux Teak Compatible

Supplied with fitting options for different deck finishes, making the kit suitable for yacht decks, swim platforms and flybridges.

🧰

Complete Fitting Kit

Kit includes stainless steel deck plates and fixing screws, giving you the main components required for installation.

🇬🇧

Manufactured in the UK

Manufactured in the United Kingdom for yacht and superyacht use, with a premium finish suitable for professional marine environments.

🔐

Tie-Down Kit Compatible

If you do not already have a way of securing your tender to the deck, this chock kit can be paired with a tender tie-down kit.

⏱

Fast Dispatch

Available to order and normally ships within approximately 3–5 working days from invoice payment.

Williams 280 MiniJet Tender Chocks (Kit # 800)

Specifications:

Manufactured in Iroko (similar to hard wood like teak but without the cost)

Tools required for chock deck fittings installation:

Flush Fit deck fittings: 3mm drill bit, 68mm hole saw, 32mm hole saw, router, mastic
Low Profile deck fittings: 3mm drill bit, 32mm hole saw, sealant

Check out drill kit C465

One more thing.. if you do not already have a means of securing your tender to the deck please click HERE to see the options.

RMC807

£849.17

excl. VAT and shipping costs

5.3 kg
Available
Ships within 2 - 5 working days from invoice payment, Submit Quote/Invoice Request to get accurate shipping costs¹

What’s included in the Williams MiniJet Tender Chock Kit

Williams MiniJet Tender Chock kit components included for installation

FWD & AFT Chock

4 x Flush Fit Deck Fittings

4 x Low Profile Deck Fittings

4 x Stainless Steel Deck Plates

4 x Split Bush

12 x Fixing Screws

Deck Fitting Options Explained

Williams tender chocks are supplied with both flush-fit and low-profile deck fitting options, making the kit suitable for different yacht deck surfaces and installation preferences.

Flush-Fit Deck Fittings

Best for real teak decks

Best for: Real teak decks where a recessed deck fitting is preferred.

Flush-fit deck fittings sit neatly into the deck surface, helping create a cleaner finish when the chocks are removed. They are ideal for yacht decks where a more discreet removable chock installation is required.

Designed for real teak deck installations
Creates a neat recessed finish
Allows the Iroko chocks to be removed when not in use
Suitable where a lower-profile deck finish is preferred

Low-Profile Deck Fittings

Best for GRP and faux teak decks

Best for: GRP and faux teak decks where a raised low-profile fitting is suitable.

Low-profile deck fittings are used where a recessed flush-fit installation is not the preferred option. They provide a practical removable mounting point for the chocks on suitable GRP or faux teak deck surfaces.

Suitable for GRP and faux teak deck installations
Practical raised low-profile fitting design
Allows the Iroko chocks to be removed when required
Useful where flush routing into real teak is not required

Quick guide: Use flush-fit deck fittings for real teak decks, or low-profile deck fittings for GRP and faux teak decks. Both options work with the push-fit removable chock system.

Chock Deck Fitting Installation Tools (optional)

Tools to aid an easier install

Deck Fitting Drill Kit

View Product

Chock Router Jig Set

View Product

Chock Installation Template

View Product

Router Cutter

For flush deck fitting installation

View Product

Chock Spares & Extras

Flush Deck Chock Deck Fitting Set

View Product

Low Profile Chock Deck Fitting Set

View Product

Caulk Line Deck Fitting Set

View Product

⚓

Complete the Williams Chocks Setup with a Tender Tie Down Kit

Chocks support the tender, while tie down kits secure it to the deck. Pair your Williams MiniJet tender chocks with a suitable marine-grade tender tie down kit for a complete onboard storage setup.

View Tender Tie Down Kits

Recommended: use tender tie down kits if you do not already have suitable deck securing points and straps for holding the tender safely in place.

Williams MiniJet Tender Chocks FAQs

Helpful answers about Williams MiniJet tender chocks, removable Iroko chock systems, deck fitting options, installation and related tender securing products.

Are these chocks suitable for Williams MiniJet tenders?

Yes. These chocks are designed for Williams MiniJet tender storage on yacht decks, swim platforms, flybridges and superyacht storage areas.

What are the chocks made from?

The chocks are made from Iroko, a durable hardwood commonly used for yacht and marine deck equipment.

Are the Williams MiniJet chocks removable?

Yes. The chocks use a push-fit removable deck fitting system, allowing the Iroko chocks to be removed when the tender is not onboard.

What deck fittings are included?

The kit includes both flush-fit deck fittings and low-profile deck fittings, giving options for different deck surfaces and installation preferences.

Can the chocks be used on teak decks?

Yes. The flush-fit deck fittings are best suited to real teak decks where a recessed deck fitting installation is preferred.

Can the chocks be used on GRP or faux teak decks?

Yes. The low-profile deck fittings are best suited to GRP and faux teak decks where a raised low-profile fitting is suitable.

What is included in the Williams MiniJet chock kit?

The kit includes:

FWD & AFT Iroko chocks
4 x flush-fit deck fittings
4 x low-profile deck fittings
4 x stainless steel deck plates
4 x split bushes
12 x fixing screws

Do I need a tender tie down kit as well?

Chocks support the tender hull, while tie down kits secure the tender to the deck. If you do not already have suitable securing points and straps, we recommend pairing the chocks with a tender tie down kit.

What tools are required for flush-fit deck fitting installation?

Flush-fit deck fitting installation usually requires a 3mm drill bit, 68mm hole saw, 32mm hole saw, router and mastic.

What tools are required for low-profile deck fitting installation?

Low-profile deck fitting installation usually requires a 3mm drill bit, 32mm hole saw and sealant.

Are installation tools available?

Yes. Optional chock installation tools and drill kits are available separately to help with deck fitting installation.

Can these chocks be used on hydraulic bathing platforms?

Yes. Williams tender chocks can be used on hydraulic bathing platforms if required, provided the installation and deck structure are suitable.

How quickly do the Williams MiniJet chocks ship?

The chocks usually ship within approximately 2–5 working days from invoice payment, subject to stock and order details.

What related products should I consider?

Useful related products include Williams tender chocks, universal tender chocks, tender tie down kits, tender mooring whips and carbon boat hooks.

Quick guide: Use flush-fit deck fittings for real teak decks, low-profile fittings for GRP or faux teak decks, and pair the chocks with a tender tie down kit if you need a complete tender securing setup.