2-Pt Flush Fit Padeye Tie Down Kits

Suitable for: F5 series & F7 series Seabob models

• 1 x Padeye End Ratchet Strap 
• 1 x Webbing Protector
• 2 x Flush fit deck padeyes (for Teak decks)
• 4 x Snap Toggles
• 6 x Fixing Bolts

What you will need to install the flush fit padeyes: 

✅ Pencil  ✅ Drill ✅ 80mm hole saw ✅ 32mm hole saw ✅ Router ✅ 3mm drill bit ✅ 13m drill bit ✅ 4mm Allen Key ✅ Mastik sealant

Check out the Padeye Drill Kit P353 

IMPORTANT NOTE: Flush Padeyes are only suitable for fitting to real Teak decks - if your deck is faux teak or GRP please see Low Profile Padeye kits