Seabob Chock / Cradle
Elevate your Seabob® experience with high-quality Seabob® chocks, designed for stability and security on the water. These sturdy chocks are essential for safely storing your Seabob® while you take a break (freestanding) or during transport (push fit). Mount your Seabob on your deck, swim platform, flybridge or in the garage.
Seabob Chock Key Features:
- Durable Construction: 1 piece construction cradle, made from premium Iroko with soft pads to to protect the Seabob's paintwork. The cradle is built to withstand the rigours of saltwater environments, ensuring long-lasting performance.
- Universal Fit: Designed to fit all F5 Seabob® models (including F5, F5 S, F5 SR)
Push Fit Seabob Chock Features - all the above + the below:
- Optimal Stability: The innovative design keeps your Seabob® securely in place, helping to prevent any movement that could lead to damage during storage or transit.
- Easy Installation: With a user-friendly setup, push to fit, pull to remove system so the cradle can be quickly and easily mounted and removed (after the deck fittings are installed) allowing you to focus on what matters most—enjoying your time on the water.
- Removable: Simply push to fit, pull to remove so you can clear your deck space when the chock is not in use.
The Freestanding Seabob® Chock / Cradle is designed to protect your Seabob and deck offering an area to put the Seabob when not in use. It has pads on both the base to protect your deck & on the cradle to protect your Seabob.
Seabob Chock / Cradle #C600 - Freestanding
Suitable for: F5, F5 S, F5 SR models
What's Included:
- Iroko Seabob® chock / cradle with soft pads to prevent damage to the Seabob® paintwork and deck
DIMENSIONS (cm): 60 (L) x 52 (W) x 19 (H)
EMAIL US TO PRE ORDER
£717.67
excl. VAT and shipping costs
- Sold Out
The Push fit Seabob® Chock / Cradle is supplied with deck fittings, combine this with a padeye tie down strap to hold your Seabob® securely to the deck, swim platform or flybridge.
The Seabob® chock / cradle is supplied with the attachment pin manufactured in a hard plastic to avoid any damage to the stainless deck plates. To ensure the chocks sit flush on the deck, the underneath of the chocks are rebated to allow for the “low profile” deck fittings.
Super soft pads to protect your Seabob hulls paintwork.
Seabob Chock / Cradle #C600 - Push fit
Suitable for: F5, F5 S, F5 SR models
What's Included:
- Iroko Seabob® chock / cradle (push to fit, pull to remove) with soft pad to prevent damage to the Seabob® paintwork
- 2 x Flush chock deck fittings - for when a clean deck is required (applicable for teak decks) OR 2 x Low Profile chock deck fittings (for flybridges when cavity space is limited, on GRP, esthec or faux teak decks, or when more routing is not an option)
- 2 x Stainless Steel Deck Plates
- 2 x Split Bush
- Fixing Screws
DIMENSIONS (cm): 60 (L) x 52 (W) x 19 (H)
OPTIONAL:
- Seabob Tie Down Kit
EMAIL US TO PRE ORDER
£893.50
excl. VAT and shipping costs
- Sold Out
The Tools you will need for Seabob® chock / cradle deck fittings installation:
- Flush Fit deck fittings: 68mm hole saw, 3mm drill bit, 32mm hole saw, router, mastic
- Low Profile deck fittings: 3mm drill bit, 32mm hole saw, sealant
How to secure your Seabob® to the deck?
OPTIONAL: Single strap Seabob® padeye tie down kit
What's included:
- 2 x Flush fit or Low Profile Padeyes
- 1 x Padeye end ratchet strap
- 1 x Webbing Protector